Best Microphone Accessories
Top 6 Best Microphone Accessories in India | 23rd Sep 2020
Windscreens & Pop Filters, Microphone Stands
Reviews, Comparison and Buying Guide
Why Microphone Accessories?
Microphone stands are useful, not just for performance or recording, but also when it’s not in use. Rather than keeping the mic on the floor, or somewhere where it can potentially be damaged, the stand provides a solution for keeping it safe.
Best Microphone Accessories | Buying Guide : Things to consider while buying a Microphone Accessories
Microphone Windscreens & Pop Filters
A microphone windscreen is essentially a wind filter that completely encompasses a microphone capsule (and more often than not the entire microphone). Instead of the wind hitting the hard surfaces or diaphragm of microphone, which causes noise, it hits the windscreen which is designed to dissipate the energy and eliminate as much noise as possible.
Microphone windscreens usually cover the entire microphone, but there are three basic types:
- Windjammers: Synthetic fur covers — also called a “dead cat,” “wind muff,” windjammers, or windsocks — are slipped on to cover shotgun and condenser microphones when recording outdoors.
- Foam: There are also windscreens that come in the form of a foam cover. Commonly made of polyurethane, the density of foam windscreens determine its efficiency in blocking wind.
- Baskets/Blimps: You’ll also come across the terms baskets or blimps, which are essentially made of mesh material with a thin inner foam layer that covers the entire microphone like a pill but provides an open-air chamber between it and the microphone.
Why do you need foam mic covers?
Microphone Windscreens protect your wireless microphone headsets from excessive moisture and improve the sound quality of your microphone by eliminating the “pops” at high volumes, breath sounds, and wind noise. They help protect your microphone and act as barriers against dust and debris.
How do you find the right size foam?
Simply find your mic from the list below and click on the link to find the perfect, snug fit designed for your microphone. For major brands you can choose from our SupremeFit™ Foams, Factory Original Foams, or Generic Foams.
On the other hand, pop filters or pop screens are used mostly indoors to improve the quality of your recorded voice. Instead of covering the microphone, they are smaller and often placed at a safe distance between the capturing side of the microphone and the speaker.
The metal or soft, stocking-like mesh of the pop filter is designed for maximum transparency while reducing popping sounds or plosives (p, b, t, k, g, d) when you sing or talk. By shielding breath blasts, you won’t sound like you’re spitting into the mic. Pop filters also come in different shapes (usually circular or a curved rectangle) but they essentially work the same way. The thinner mesh material lets more high-frequency sounds through than foam covers do, making it ideal for recording podcasts, interviews, and singing voices.
Many say they are just an accessory, but the importance of getting one of the best mic stands around cannot be denied. Microphone stands are an important part of any stage or studio setup. There are quite a few varieties available, and to get the best one for you as an individual, it’s important to know the different types in and out.
Categories of Mic Stands
The 6 basic categories of microphone stands are as follows:
- Tripod Stands – which are the most common and designed for general-purpose use.
- Tripod Boom Stands – which offer a longer reach than standard tripod stands.
- Round Base Stands – which are ideal for singers on stage, because they use less floor space and are harder to trip-over than tripod stands.
- Low-Profile Stands – which are commonly used for kick drums, guitar cabs.
- Desktop Stands – which can look similar to low-profile stands, but are intended more for podcasting and bedroom recording.
- Overhead Stands – which are the largest and most expensive of all stands, and are used when extreme heights and angles are required, such as with drum overheads.
Almost all the microphone stands have an adjustable height. However, the range can vary quite significantly. This is an important consideration and should commensurate to your own height. With the boom arm stand, you might get away with a smaller height in certain situations, such as if you had your keyboard on an adjustable stand, but with a typical stand, you need something that can reach you.
The height depends on the setting or uses, too. While a low profile stand may be suitable for kick drums, it cannot be extended enough for overhead drums. Some heights may be too low for covering a choir.
Types of clutches
The clutch is what allows you to adjust the height. This, of course, is important because, without it, the mic stand will not be as tall as you want it to. There are two kinds of clutches: twist and grip. The former is most widely used, and as the name suggests, twists to tighten. The good quality ones tighten pretty fast while others take several turns. Grip clutches utilize a one-handed squeeze to tighten into place. One obvious advantage is that this is much quicker to achieve in a live setting – this type of clutch tends to be the best.
For boom stands, there is another kind as well – a screw or a knob that can tighten a collar or push it closer to the tube. These vary a lot from one model to another. You have something similar for adjusting the angle as well.
Weight is an important consideration when buying a mic stand. A lot of people generally assume that a heavier stand would not make a portable or suitable choice on stage. On the contrary, a light stand can be less stable when compared with heavy ones. However, now some stands are incredibly lightweight but still quite stable, such as those tripod stands. If you are going to move with the stand a lot, then the obvious choice should be a light weighted one.
Another misconception about mic stands is that a heavier one would be difficult to carry around. That’s not always the case, as some lightweight ones can be difficult to carry too. It all depends on the make and its capability. If the stand is foldable, it becomes all the more easy to pack up and take wherever.
A lot of people think tripod stands are not highly portable. That’s not always the case, as some newer models have foldable legs, making the stand much smaller. As for the ones with a rounded base, it’s also easier to carry them. The stand can be removed from the base and packed separately with the other equipment. Perhaps this is why this type of stand is most commonly used.
The pricing is yet another important factor. To get high quality, you have to spend a little more money. In a professional setting, it makes sense to go for something more expensive from a known brand. For amateurs, a moderate-quality, lightweight stand should do the job. The prices vary greatly, but most microphone stands cost less than $100. Few stands from very high-end brands cost more than that, but you should be able to get a decent quality one of any kind within this range.
Top 6 Best Microphone Accessories – [Updated and Highly Recommended]
Windsreens & Pop Filters
- The microphone wind screen pop filter mask shield help get your best vocal recordings and ensure that your tracks are audible and easy to understand and also it will make sure your message loud and clear
- 360 degree flexible gooseneck holder is made of smooth bendable steel material for adjustable precise positioning to efficiently banish the dreaded hissing and lisping sounds caused by over eager performers
- Suitable for personal or professional recording studio, ktv and stage, chat rooms, broadcasting room, internet cafes and control room
- Adjustable clamp fixes securely to any mic stand, tables, desks, shelves, counters, etc. Suitable for any stores, families, stages, studios, broadcasting and tv stations, etc.
- Included pop shield and clamp(This item is designed to protect sound and avoid voice cracking with letter P/F etc. If buyer feel there is stress, he could just remove this pop filter away. )
- Country of Origin: China
Features / Reviews
Help get your best vocal recordings and ensure that your tracks are audible and easy to understand
360 degree flexible gooseneck holder is made of smooth bendable steel material for adjustable precise positioning
Adjustable clamp fixes securely to any mic stand, tables, desks, shelves, counters, etc.
Included pop shield and clamp
The DeadCat Go is a furry wind cover for the VideoMic Go, designed for use in windy environments.
Features / Reviews
Designed for use in windy environments
Artificial fur is specially designed so as to minimize wind noise
Remains acoustically transparent
- Made of metal alloy and professional acoustic foams, breaks up room reflections and absorbing noise, acting as an isolation shield
- 3/8" and 5/8" thread adapter for stands and microphone holders
- Can be used together with any recording occasion
- Dimensions (W x H x D):16.7" x 12" x 6.1"/42.5cm x 30.5cm x 15.5cm
- Note: the microphone and headphone are not included
The microphone acoustic isolation shield made of metal alloy and professional acoustic foams, it designed to help minimizing the undesirable hall refection, noises and echo in order to obtain a very “dry” vocal or instrumental recording signal.
This filter allows good recording results even under unfavorable ambient conditions without having to take complicated measures to reproduce studio conditions or an acoustical insulation.
Mental Alloy + Professional Acoustic Foams
Dimensions (W x H x D):
16.7″ x 12″ x 6.1″/42.5cm x 30.5cm x 15.5cm
1 x Microphone Shield
1 x Support Bar
1 x 3/8″ and 5/8″ Thread Adapter
Features / Reviews
Made of metal alloy and professional acoustic foams
Breaks up room reflections and absorbing noise, acting as an isolation shield
Help minimizing the undesirable hall refection, noises and echo
Kadence Dual Microphone Stand
Features / Reviews
Instant EZ Glide
Durable rectangular tubing leg construction
EZ Angle Roller
- Maximum Microphone Clip Diameter is 1.26 inches
- Microphone and filter shield mask is not included
- The stand is not suitable for Blue Yeti USB microphone
- The adjustable black scissor arm stand is made of high quality steel frame
- Included plastic mic clip is sturdy and durable
- Folding type, convenient to carry
- The adjustable arms allow you to carry it with you easily and adjust the suitable angle and height to show your perfect voice
- Can be mounted on the announcers' table with the included table mounting clamp
- Compact microphone stand designed for heavy duty carry
- Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc.
- Completely flexible, firmly attach the microphone anywhere
Ideal for radio broadcasting studio, voice-over sound studio, stages and TV stations, etc. The scissor arm stand is equipped with super-strong spring so that it can stand much more weight. Your microphone is held safely and firmly on this scissor arm microphone clip. The double-braced arms add strength. Extend up to 80cm. A standard microphone clip to mount most standard-sized handheld microphone.
Features / Reviews
Made of high quality steel frame
Included plastic mic clip is sturdy and durable
Folding type, convenient to carry
- Tripod boom microphone stand holds microphone securely in place, Microphone clip Included
- Long boom arm with molded plastic counterweight for horizontal placement
- Versatile design folds flat for use as straight mic stand
- Sturdy steel construction; ultra-light for easy transport
- Compatible with 3/8-inch to 5/8-inch adapter; clip-on cable holder keeps cords out of the way
Blueberry R030 tripod boom microphone stand—perfect for recording studios, small intimate stages, and large performance halls alike. In addition to functioning as a straight microphone stand, the unit also allows for horizontal placement of a microphone thanks to its long boom arm. The stand’s optional boom connects securely to the top of the stand and comes with a molded plastic counterweight for reliable positioning. The boom arm’s adjustable tilt and extension makes it easy to place a mic in front of the sound source without taking up valuable floor space—tilt it up high for a cymbal set or down low for an amplifier. Whether using the boom arm or folding it flat for use as a straight stand, the Bleuberry R030 mic stand offers exceptional versatility and convenience when it comes to taking the stage by storm.
Features / Reviews
Tripod boom microphone stand holds microphone securely in place
Long boom arm with molded plastic counterweight for horizontal placement
Sturdy steel construction; ultra-light for easy transport
So there you have my recommended microphone windscreen. The idea behind this article was, of course, to offer my opinion, but to also give a sort of buyer’s guide of what to look for in a microphone windscreen.
Now that you know each type of mic stand, their prices, and capabilities, it will be easier to choose the best product. However, there should be an evaluation of your own circumstances as well. The type of stand you want first depends on why you need it. For example, if you’re buying something for podcasts, then a desk stand is the ideal one. If you are buying for a child, then a tripod boom stand might be the right choice. If you’re going to use it in multiple settings, like in studios, or in classes, then go for the one that is most suitable for these. You don’t necessarily have to buy separate stands for each use – they are pretty multifunctional, especially if you add accessories.
With that, I’d like to wish you luck in your windy outdoor recordings and in all of your other audio endeavours.